ลำโพง Turbosound Milan M15 Powered Loudspeaker 15″

Name: ลำโพง Turbosound Milan M15 Powered Loudspeaker 15"
Price: 22000.00 THB
Availability: InStock

ลำโพงกลางแจ้ง Turbosound Milan M15 เป็นตู้ลำโพงแบบมีกำลังขยายในตัว 1100วัตต์ ขนาดดอกลำโพง 15″ Woofer, 1″ High Compression Driver, Integrated Klark Teknik DSP, Class-D Amplifier

ราคาสินค้าเป็นราคาต่อใบ…และไม่รวมภาษีมูลค่าเพิ่ม

฿22,000.00

สอบถามและสั่งซื้อสินค้า

Category: ลำโพงแบบมีกำลังขยายในตัว (Active) Tag: TURBOSOUND

Description

Turbosound Milan M15 1100-Watt 2-Way 15″ Powered Loudspeaker

The Milan M15 1,100-Watt 2-Way 15″ Powered Loudspeaker from Turbosound is a Class-D powered speaker that can be used for a variety of PA applications in both portable and installed scenarios. It features 2 independent input channels with mic and line inputs as well as a 2-band EQ and intelligent limiting. A mix output connector allows you to connect to other Milan series loudspeakers.

Its processing is powered by the integrated Klark Teknik DSP and has an electronic crossover. A low-cut filter at 100 Hz allows you to use the M15 as a wedge monitor, but it can also be pole mounted or flown for a variety of placement options. Its trapezoidal enclosure is constructed from high density polypropylene and is designed to reduce resonances internally. It features a recessed handle for carrying.

Capture

Features:

2 way full range powered loudspeaker for portable PA and install applications
1,100 Watt power featuring KLARK TEKNIK Class-D technology
KLARK TEKNIK Digital Signal Processing for total system control
High excursion 15″ low frequency driver with low mass voice coil for improved transient response
1″ high temperature dome compression driver with extended high frequency reproduction
Converging elliptical waveguide provides wide dispersion and excellent pattern control
Speech/music switch featuring optimised equalisation for voice or music applications
Switchable 100 Hz high pass filter for subwoofer integration
Lightweight composite enclosure with black finish
Rugged powder coated perforated steel mesh grille
Dual angle pole mount for accurate audience coverage
Multiple internal rigging points for installation applications

Specifications

Components	LF Driver: 1x 15″ (381 mm) HF Compression Driver: 1x 1″(25 mm)
Frequency Response	45 Hz to 18 kHz, +/-3 dB 40 Hz to 20 kHz, +/-10 dB
Nominal Dispersion	90° H x 60° V @ -6 dB points
Maximum SPL	130 dB, peak
Construction	Injection-molded polypropylene enclosure Recessed carrying handle Integral dual-angle pole mount socket 6x M10 threaded internal rigging points
Grille	Powder coated galvanized perforated steel mesh grille with foam backing
Connectors	Mic/Line Input: XLRF/TRS combo jack, wired pin 2 hot Mix Output: Male XLR wired pin 2 hot IEC mains connector with integrated fuseholder
Controls	Level, Line/Mic, Low Cut, Speech/Music, Bass and Treble, Front LED, Mains on/off
Indicators	Blue Power LED Green Signal LED Red Limit LED Red Clip LED
Amplifier	Type: Class D Maximum Power Output: 1,000 W (LF) ; 100 W (HF) Input Sensitivity: -32 dBu (Mic), -2 dBu (Line) Microphone Input Impedance: 560 Ω unbalanced, 1 kΩ balanced Line Input Impedance: 20 kΩ unbalanced, 40 kΩ balanced EQ: Bass +/-6 dB @ 80 Hz, Treble +/-6 dB @ 12 kHz Amplifier Protection: Full short circuit, open circuit, thermal
Mains Voltage	USA/Canada: 100-120 V~ (T 6.3 A H 250 V) UK/Australia/Europe: 220-240 V~ (T 3.15 A H 250 V) China: 220-240 V~ (T 3.15 A H 250 V) Japan: 100-120 V~ (T 6.3 A H 250 V)
Power Consumption	140 W @1/8 max power
Dimensions (HxWxD)	28.3 x 18.0 x 14.5″ (719.0 x 457.0 x 14.5 mm)
Weight	60.9 lb (27.7 kg)