Sale

เพาเวอร์แอมป์ QSC PLX3102 Power Amplifier

Name: เพาเวอร์แอมป์ QSC PLX3102 Power Amplifier
Price: 50150.00 THB
Availability: InStock

เครื่องขยายเสียงกลางแจ้ง QSC PLX3102 มีกำลังขับ 600 วัตต์ ที่ 8 โอมห์ 1000W @ 4Ω Stereo (per channel) 1550W @ 2Ω Stereo (per channel) 2100W @ 8Ω Bridged-Mono 3100W @ 4Ω Bridged-Mono

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม…..

~~฿59,000.00~~ ฿50,150.00

สอบถามและสั่งซื้อสินค้า

Category: เพาเวอร์แอมป์ (Power AMP) Tag: QSC

Description

เครื่องขยายเสียง QSC PLX3102 600W 8 Ohms

The QSC PLX3102 is a lightweight rackmount stereo power amplifier, offering up 600 Watts per side at 8 Ohms, and weighing in at a mere 21 lbs. The unit is equipped with built-in subwoofer processing, filter switches, and front panel indication of bridge mono status.

The PLX3102 is a worthy and versatile solution for users who need to drive up to four loudspeakers from each amplifier channel (2 ohm loading), or who require extremely high power bridge mono operation for specific applications.

Features:

Lightweight, high-output stereo rackmount power amplifier
21-position front-panel gain controls for precise, repeatable amplifier adjustment
Cooling design with front-exit hot air exhaust, Flow-through heat sinks require no filters, eliminating clogging
Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection, stable into reactive or mismatched loads
Fully selectable low frequency filtering with a choice of 30Hz or 50Hz roll-off
Front panel LED power, clip, -10 dB, and signal present indicators for system monitoring and troubleshooting, bridge and parallel mode LED indicators
100 Hz high pass and low pass filters for bi-amping subwoofer and satellite systems without the need for an external crossover
Switchable/defeatable 33 Hz infrasonic filters protect woofers from over-excursion damage, switchable/defeatable clip limiters
Balanced XLR inputs with parallel TRS connectors and loop-through support
Speakon(TM) NL-4 output connectors with positive-locking speaker connection; Ch. 1 output uses all 4 wires for single-cable connection to bi-amplified speakers

Specifications

Power Rating	Rating @ 1 kHz, THD=0.1% 1000W @ 4Ω Stereo (per channel) 600W @ 8Ω Stereo (per channel) 1550W @ 2Ω Stereo (per channel) 2100W @ 8Ω Bridged-Mono 3100W @ 4Ω Bridged-Mono Rating @ 20 Hz – 20 kHz, THD=0.05% 900W @ 4Ω Stereo (per channel) 550W @ 8Ω Stereo (per channel) 1900W @ 8Ω Bridged-Mono
Damping Factor	>500
Input Sensitivity	1.23 Vrms @8 Ohms
Input Impedance	20 kOhms, balanced 10 kOhms, unbalanced
Gain	35dB (@8 Ohms)
Frequency Response	20 Hz – 20 kHz, -0.5dB
Signal-to-Noise Ratio	-107dB (20 Hz – 20 kHz)
Total Harmonic Distortion (THD)	<0.02%, 20 Hz – 20 kHz
Input Connections	2 x XLR female, balanced 2 x 1/4″ TRS phone, balanced
Output Connectors	2 x pair 5-way binding posts 2 x NL-4 Speakon
Controls Front Panel	2 x rotary Level Control knobs 1 x Power switch
Controls (Rear)	1 x Bridge/Stereo/Parallel Input Config. Switch 1 x Clip/Limiter 2 x Top 100 Hz HPF/Full/Sub 100 Hz LPF Filter switches 2 x 33 Hz HPF/Full (infrasonic) Filter switches
Indicators	2 x Ch.1,2 red Clip LEDs 2 x Ch.1,2 green -10dB LEDs 2 x Ch.1,2 green -35dB signal LEDs 1 x blue Power LED 1 x amber Parallel LED 1 x amber Bridge Mono LED
Cooling	1 x variable-speed fan (back-to-front airflow)
Power Consumption	1/8 power (pink noise) @8 Ohms: 6A/120V @4 Ohms: 9.5A/120V @2 Ohms: 14A/120V 1/3 power (pink noise) @8 Ohms: 10.7A/120V @4 Ohms: 16.5A/120V @2 Ohms: 27A/120V Full Power @8 Ohms: 21A/120V @4 Ohms: 33A/120V @2 Ohms: 55A/120V
Power Requirements	100, 120 or 220-240 VAC, 50- 60 Hz
Dimensions	19 x 3.5 x 14.9″ (483 x 89 x 379mm); 2U
Weight	21 lbs (9.5 kg)
Specialties	Detented Level Attenuators Comprehensive Protection Circuitry On/Off Muting, DC-fault Power Supply Shutdown
Packaging Info
Package Weight	27.82 lb
Box Dimensions (LxWxH)	24.0 x 18.5 x 6.0″