ไมโครโฟนบันทึกเสียง ART C1 เป็นไมโครโฟนชนิดคอนเดนเซอร์ มีรูปแบบการรับเสียงแบบ Cardioid, ตอบสนองความถี่ 20 Hz to 20 kHz มาพร้อมกับ Shockmount และ Hard Carry Case
ราคาไม่รวมภาษีมูลค่าเพิ่ม…..
฿8,800.00
ไมโครโฟนบันทึกเสียง ART C1 เป็นไมโครโฟนชนิดคอนเดนเซอร์ มีรูปแบบการรับเสียงแบบ Cardioid, ตอบสนองความถี่ 20 Hz to 20 kHz มาพร้อมกับ Shockmount และ Hard Carry Case
The ART C1 cardioid condenser microphone delivers an exceptional quality and performance in a highly cost effective solution. The low-mass diaphragm high quality 34mm capsule delivers a clear tone with accurate sonic detail, making it perfect for a wide range of recording and live sound applications.
In live sound and remote recording applications, the ART C1’s cardioid pattern offers excellent feedback rejection and better isolation and will give you the best results on most vocal applications and a wide range of solo instruments including background brass and woodwinds, acoustic stringed instruments (violin, viola and cello), drums and percussion.
It offers full frequency response at the front of the microphone with a very controlled and predictable proximity effect – the increased low frequency response when microphone is placed close to sound source. (Vocalists can use the proximity effect to their advantage, adding fullness and more ‘bottom end’ to the voice. Experienced vocalists can easily incorporate it as part of their overall microphone technique.)
As a condenser microphone, the ART C1 requires phantom power to operate. The microphone’s precision-tooled microphone body and dent resistant stainless-steel wire-mesh windscreen protects the internal electronics and microphone capsule ensuring unmatched long term reliability. The C1 comes equipped with an extremely secure custom shockmount. Aluminum carry case included.
Sound Field | Mono |
Operating Principle | Pressure Gradient |
Transducer | Condenser |
Diaphragm | 1.34″ (34 mm) |
Polar Pattern | Cardioid |
Frequency Range | 20 Hz to 20 kHz |
Signal to Noise Ratio | 78 dB |
Equivalent Noise Level | 16 dB A-Weighted |
Maximum SPL | 132 dB SPL RMS |
Impedance | 150 ohms |
Load Impedance | 1000 ohms |
Sensitivity | -37 dB |
Power Requirements | 48 V |
Output Connectors | 3-pin XLR |
General | |
---|---|
Length | 6.6″ (167.64 mm) |
Diameter | 2.2″ (55.88 mm) |
Weight | Not Specified By Manufacturer |
Packaging Info | |
---|---|
Package Weight | 3.85 lb |
Box Dimensions (LxWxH) | 12.1 x 9.8 x 4.2″ |