ตู้ลำโพง MACKIE DLM12S Powered Subwoofer 12″

ลำโพงซับเบสแบบมีกำลังขยาย MACKIE DLM12S ขนาดดอกลำโพง 12 นิ้ว มีกำลังขับ 1000 วัตต์ RMS /2000 วัตตื peak, Class-D amplification, DLP Digital Processor, 3-memory locations, Smart Protect DSP dynamically protects amp/driver

ไม่รวมภาษีอากร … เป็นราคาใบละ …..

฿41,900.00

สอบถามและสั่งซื้อสินค้า

Category: ลำโพงแบบมีกำลังขยายในตัว (Active) Tag: MACKIE

Description

Mackie DLM12S Powered Subwoofer 2000W

The perfect companion to the DLM12 or DLM8, the Mackie DLM12S is a 2000-watt powered subwoofer that picks up where the DLM mains leave off, provide a warm and present low end that is ideal for bands, DJs or venues. Equipped with flexible I/O, it can accommodate any system, powered or unpowered, or you can build it from the ground up with DLM series mains. It has a pole flange for mounting full-range mains directly above it, and is both light and powerful.

Features:

2000W power via ultra-efficient Class-D amplification
High-power 12″ heat-treated woofer with 3″voice coil
Ultra-low frequency extension hits hard down to 35Hz
DLP Digital Processor
Powerful, one-touch digital processor with bright OLED screen
Precision digital crossover
Presets for use with DLM and SRM Series full-range loudspeakers
Variable crossover control for optimization with any loudspeaker
Six total XLR connects for flexible I/O control
Two line level inputs
Two full-range outputs for side fills, etc.
Two high-pass outputs for direct connection to DLM loudspeakers
Unmatched system control for professional applications
Alignment delay up to 300ms for delay stack, balcony, etc.
Three memory locations for instant venue setting recall
Smart Protect DSP dynamically protects amp/driver
Innovative ultra-compact design
Highest-output compact subwoofer on the market
Fit an entire DLM system in nearly any car
Stack them up for storage
Pole mount a DLM8 or DLM12
Extremely durable 15mm poplar cabinet
Rugged, powder-coated 20 gauge steel grille

Specifications

Input / Output
Active or Passive		Active, Class-D amplification
Audio Inputs		2 x XLR balanced (1 x L/R)
Input Impedances		20kΩ balanced 10kΩ unbalanced
Audio Outputs		2 x XLR balanced – Full Range Outputs (1 x L/R) parallel with input 2 x XLR balanced – High Pass Outputs (1 x L/R)
Amplifier / Speaker
Transducer		12″ (305 mm) woofer diameter 3″ (76 mm) voice coil diameter Paper diaphragm material Ferrite magnet material
Rated Power		1,000W RMS 2,000W peak
THD		< 1%
Cooling		Multi-speed fan
Performance
Frequency Response		35 Hz to 90 Hz or 35 Hz to 135 Hz, (-10 dB) user-selectable
Maximum Sound Pressure Level (SPL)		128 dB @ 1 m, calculated
Crossover Point		60 to 120 Hz, user-selectable
System Processor		DLP Digital System Processing: Volume [VOL]: Off (-∞ dB) to +10 dB Crossover [XVR]: Four preset modes, one variable mode Delay [DLY]: 0 to 300 ms Memory [MEM]: 3 locations for instant venue setting recall and factory reset
General
Construction		Durable 0.6″ (15 mm) poplar cabinet Black paint finish Handle on each side Powder-coated 20-gauge steel grille
Power Requirements		100 to 120VAC or 220 to 240VAC, 50/60 Hz, 250W
AC Plug Style		3-pin IEC 250VAC
Operating Temperature Range		32 to 104°F (0 to 40°C)
Dimensions (H x W x D)		17.9 x 16.4 x 20.8″ (455 x 417 x 529 mm)
Weight		48 lb (21.7 kg)