Sale

ลำโพง PEAVEY PV 115D Active Speakers 15″

ตู้ลำโพงกลางแจ้งแบบมีกำลังขยายในตัว PEAVEY 115D ขนาดดอกลำโพง 15″ แบบ 2 ทาง 400 watts continuous 800 watts peak class D Amplifier

ราคาไม่รวมภาษีมูลค่าเพิ่ม เป็นราคาคู่ละ…..

~~฿39,000.00~~ ฿25,000.00

สอบถามและสั่งซื้อสินค้า

Category: ลำโพงแบบมีกำลังขยายในตัว (Active) Tag: PEAVEY

Description

PEAVEY PV 115D 2-Way Powered Speaker 400 watt

The PV® Series, one of the most enduring loudspeaker enclosures from Peavey, is now powered with class D technology. Peavey® proudly debuts the PV 115D, two lightweight and portable loudspeaker enclosures, utilizing Peavey’s legendary loudspeaker and class D power amp technology to deliver unparalleled performance and value. A long tradition in sound reinforcement, the PV Series enclosures are housed in durable wooden, carpet-covered enclosures with a built-in pole mount. The new PV powered enclosures deliver 400 watts of bass-pounding, distortion-free sound utilizing Peavey’s DDT™ compression.

Features:

400 Watts “peak” available power
800 Watts “peak” available power when connecting an additional passive 8 Ohm enclosure to the speaker out
Two-way powered sound reinforcement enclosure
DDT™ compression/anti-clipping protection
Signal input via combo female XLR/ 1/4″ phone jack, providing balanced operation
Constant directivity tweeter horn, 60° X 40°
Contour switch provides bass and treble lift
Heavy-duty crossover network with high frequency driver protection
Steel handles and protective corners
Full-coverage heavy-duty perforated steel grill with powder coat finish
RX™14 titanium diaphragm compression driver, with 1.4″ titanium diaphragm
Steel pole mount adaptor
Peavey® exclusive 15″ heavy-duty woofer with 2 3/8″ voice coil & 50 oz. magnet
T-Nut speaker mounting
Class-D powered system with up to 800 W total peak available power
Power amp output jack available to power another passive speaker
Carpet covered trapezoidal enclosure
Weight Packed: 61.00 lb(27.669 kg)
Width Packed: 20.25″(51.435 cm)
Height Packed: 33.5″(85.09 cm)
Depth Packed: 16″(40.64 cm)

Specifications

Speaker
Transducer Type	15″ woofer with 2.375″ voice coil and 50 oz magnet RX14 1.4″ titanium diaphragm dynamic compression driver Constant Directivity 60 x 40° horn
Frequency Range	46 Hz to 21 kHz, -10 dB (1 meter on-axis, swept-sine in 1/2 space environment)
Frequency Response	66 Hz to 17 kHz, ±3 dB (1 meter on-axis, swept-sine in 1/2 space environment
Sensitivity	95 dB (1W @ 1 m)
Maximum SPL	121 dB (peak)
Coverage Angle	60° horizontal x 40° vertical
Crossover Frequency	3 kHz
Input Connections	1 x XLR/TRS combo jack, balanced or unbalanced
Output Connections	1 x 1/4″ TS – Speaker Out, powered up to 400W @ 8:Ω 1 x 1/4″ TS – Link Out, unpowered for connection to another active speaker

Amplifier
Output Power	800 watts peak 400 watts continuous into 4Ω @ less than 1% distortion
Input Impedances	2.7kΩ balanced (XLR or 1/4″) 1.35kΩ unbalanced (1/4″)
Filter Protection	24 dB/octave roll-off, Infrasonic
Frequency Response	20 Hz to 20 kHz, +0 /-3 dB
Hum and Noise	> 90 dB below rated power
Dynamic Range	> 14 dB, DDT
THD	< 0.5%, typically
Damping Factor	> 400 @ 1000 Hz, 8Ω

Power Requirements
Power Requirements	100 to 120VAC or 220 to 240VAC, 50/60 Hz
Fuse	For 100 to 120 VAC: International fuse classification T6.3AL. In the USA, types GDC, GMC, 215, 218, and 477 cartridge-style 5 x 20 mm size fuses with a 6.3 amp 250V rating can be used.For 220 to 240 VAC: International fuse classification T3.15AL. This is a cartridge style 5 x 20 mm size time-delay fuse with a 3.15 amp 250V rating.

General
Enclosure Type	Trapezoidal, black carpet covered 12 mm MDF, black powder-coated full length perforated steel grille
Mount Type	Steel 1 3/8″ pole-mount cup for stand mounting This unit is not designed for overhead suspension
Dimensions (H x W x D)	32.25 x 18.83 x 14.75″ (819 x 478 x 375 mm)
Weight	56 lb (25.4 kg)