Sale

เพาเวอร์มิกเซอร์ PEAVEY XR8600D Power Mixer

เครื่องผสมสัญญานเสียงแบบมีกำลังขับในตัวขนาด 600 วัตต์ per channel 10 input 3-band EQ on each ch, Dedicated 7-band EQ for main/monitors with FLS™, DSP Effects built-in

ราคาไม่รวมภาษีมูลค่าเพิ่ม

~~฿40,000.00~~ ฿24,000.00

สอบถามและสั่งซื้อสินค้า

Category: เพาวเวอร์มิกเซอร์ (Power Mixer) Tag: PEAVEY

Description

PEAVEY XR8600D 10-Channel Dual 600w x 2 ch Powered Mixer

The XR 8600D powered mixer include many of the latest technological developments from Peavey engineering. Incorporating a pair of 600 Watt amplifiers, dual 7-band EQ, digital effects, FLS® (Peavey’s award-winning Feedback Locating System), DDT™ speaker protection and a host of other features, these compact powered mixers are perfect for any application.

Features:

10 line inputs
3-band equalization on each channel
Monitor send on each channel
25 dB pad: channels 1-6
Dual main or main/monitor power amp mode switch
Dedicated 7-band EQ for main/monitors with FLS™
DSP-based effects
16 presets with parameter control
Dual 600 Watt per channel internal power amplifiers
DDT speaker protection with activity LED
Mute switch for input channels 1-8
Signal/clipping indicator on each channel
48 Volt phantom power
8 improved, low-noise, mic preamps
Weight Unpacked: 25.13 lb(11.4 kg)
Weight Packed: 31.31 lb(14.2 kg)
Width Packed: 17.5″(44.45 cm)
Height Packed: 25″(63.5 cm)
Depth Packed: 17″(43.18 cm)

Specifications

Input Impedance	Lo-Z Mic: 2k ohms Line: 22k ohms Tape: 20k ohms Amplifier: 8.25k ohms
Input Gain	Lo-Z Mic: 50 dB max without pad, 25 dB max with pad Line: 30 dB max without pad, 25 dB max with pad Tape: 30 dB max
Input Level	Lo-Z Mic: -9 to -34 dBu min, -29 to -4 dBu nominal, -11 to +14 dBu max Line: -27 to -2 dBu min, +2 to +27 dBu nominal, +21 to +26 dBu max Tape: -26 dBu min, +4 dBu nominal, +21 dBu max
Inputs	Lo-Z Mic: XLR (pin 1 ground, pin 2 positive, pin 3 negative), balanced Line: 1/4″ TRS (tip positive, ring negative, sleeve ground), balanced Tape: RCA, unbalanced
Output Impedance	Main: 600 ohms Monitor: 600 ohms Tape: 10k ohms
Output Level	Main: +4 dBu nominal, +21 dBu max Monitor: +4 dBu nominal, +21 dBu max Tape: -10 dBu nominal, +10 dBu max
Outputs	Main: 1/4″ phono TS (tip positive, sleeve ground), unbalanced Monitor: 1/4″ phono TS (tip positive, sleeve ground), unbalanced Tape: RCA, unbalanced
Gain	Mic In to Main Out: 60 dB (max gain) Line In to Main Out: 30 dB (max gain)
Frequency Response	Mic In to Main Out: 20 Hz – 20 kHz (+0/-1 dB) Line In to Main Out: 20 Hz – 20 kHz (+0/-1 dB) To Power Amp Out: 40 Hz – 20 kHz (+0/-1 dB) Amplifier: 20 Hz – 20 kHz +0/-10 dB @ rated power
Total Harmonic Distortion	Mic In to Main/Mon Out: < 0.01% Line In to Main/Mon Out: < 0.01% Typical: < 0.005% Amp: < 0.01% @ rated output @ 1 kHz, < 0.5% for 6 dB overload, < 1% for 20 dB overload
Graphic EQ	Filter Frequencies: 80, 250, 500, 1k, 2k, 4, 10k Max Boost and Cut: +12 dB boost, -12 dB cut
Hum and Noise	Main: -102 dB (all controls down), -90 dB (1 channel nominal, master nominal) Monitor: -98 dB (1 channel nominal, master nominal), -90 dB (master nominal, channels nominal, mic inputs @ 150 ohms) Amp: 95 dB below rated power level (500 W)
S/N Ratio	> 90dB below rated power output, mic/line to speaker out
EIN	-122 dBu (input terminated to 150 ohms)
Crosstalk	> 80 dB (adjacent input channels, 20 Hz – 20 kHz) > 70 dB (left to right outputs, 20 Hz – 20 kHz)
CMRR	50 dB minimum (20 Hz – 20 kHz) 60 dB typical @ 1 kHz
Amplifier Power	1200 D module with DDT 600 W program into 4 ohms, both channels driven 500 W RMS into 4 ohms, both channels driven 360 W program into 8 ohms, both channels driven 300 W RMS into 8 ohms, both channels driven
Dynamic Range	> 26 dB
Damping Factor	> 100 @ 1 kHz, 4 ohms
Input Sensitivity	2.5 VRMS for 500 W @ 4 ohms
Power Requirements	Dom: 120 VAC, 60 Hz, 275 W nominal Exp: 220-240 VAC, 50/60 Hz, 275 W nominal
Dimensions (WxHxD)	21 x 11.75 x 12.38″ (533 x 298 x 314 mm)
Weight	23.8 lbs (10.8 kg)