โปรเซสเซอร์ BOSE ControlSpace EX-1280 Sound Processor

เครื่องควบคุมลำโพงและโปรเซสเซอ BOSE ControlSpace EX-1280 PA Management Processor with 12-in/8-out Analog I/O, AmpLink Output, 64×64 Dante Connectivity, and 32-bit Fixed DSP, USB Connection PC Audio Sources

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม..

฿147,400.00

สอบถามและสั่งซื้อสินค้า

Category: ดิจิตอลโปรเซสเซอร์ ( DSP) Tag: BOSE

Description

BOSE ControlSpace EX-1280 Sound Processor

The Bose Professional ControlSpace EX-1280 Digital Signal Processor is equipped for general-purpose audio processing applications and is well suited for a variety of applications including performance venues, stadiums, arenas, houses of worship, resorts, hospitality venues, and multipurpose spaces.

The processor offers an open-architecture all-in-one design for signal processing. The EX1280 includes 12 mic/line analog inputs, 8 analog outputs, a Bose AmpLink output, and 64×64 Dante connectivity for flexible configuration and high-quality sound system control.

The ControlSpace Designer software makes configuration and setup quick and easy thanks to the simple drag-and-drop programming.

Features:

Open-architecture, 1RU design built for general-purpose and PA applications
Dante audio networking supports 64 x 64 audio channels for connection to other Dante-enabled products, including native Dante-integrated microphones, amplifiers, mixers, and end points
Bose AmpLink port provides 8 channels of uncompressed, low-latency digital audio to AmpLink-equipped Bose amplifiers
Front-panel interface features a large OLED display and rotary encoder for setting network parameters and monitoring channel activity
GPIO (5 in/5 out) and Serial for interfacing with external devices and control systems
High-quality analog circuitry offers both mic and line-level I/O, operates with ultra-low noise and 118 dB dynamic range
Bose ControlSpace Designer software enables a large set of signal processing modules, such as automatic mic mixing, multiband graphic and parametric EQs, Bose loudspeaker libraries, signal generators, routers, mixers, AGCs, duckers, gates, compressors, source selectors, delays and logic
A variety of control options – compatible with the programmable Bose CC-64 and CC-16 controllers, ControlCenter digital zone controllers, and ControlSpace Remote clients
Supports industry-standard control systems using a comprehensive serial protocol through onboard RS-232 and Ethernet ports, with available drivers for AMX and Crestron-based systems

Specifications

DSP Section	Signal Processor/CPU: 32-Bit Fixed / Floating-Point DSP + ARM, 456 MHz Maximum Calculation: 3.6 GIPS / 2.7 GFLOPS Delay: 43 s Audio Latency: 1.05 ms (Analog In to Analog Out, Without AEC) A/D and D/A Converters: 24-Bit Sample Rate: 48 kHz
Analog Audio Inputs	Input Channels: 12 Balanced, Mic/Line Level Connectors, Input: 0.15″ / 3.81 mm Detachable Euroblock, 6-Pin Input Impedance: 12 Kilohms at 1 kHz (with or without Phantom Power Active) Maximum Input Level: +24 dBu Equivalent Input Noise: -118 dB at 44 dB Gain Setting Phantom Power: +48 VDC, 10 mA, Selectable per Input Pre-Gain Settings: 0/14/24/32/44/54/64 dB
Analog Audio Outputs	Output Channels: 8 Analog (Balanced, Line Level) Connectors, Output: 0.15″ / 3.81 mm Euroblock, 6-Pin Output Impedance: 200 Ohms Maximum Output Level: +24 dBu
Audio Performance	Frequency Response 18 Hz to 20 kHz (+0.8 dB/-0.2 dB Ref 1 kHz) THD+N: < 0.003% at +4 dBu (A-weighted/20 Hz to 18 kHz) < 0.01% at +44 dBu (A-weighted/20 Hz to 18 kHz)Channel Separation (Crosstalk): < -105 dB at +4 dBu 1 kHz Input Signal Dynamic Range > 115 dB, A-weighted 20 Hz – 20 kHz, Analog Input to Analog Output
Audio Over IP	Dante: 64 x 64, Primary/Secondary
Digital Audio Outputs	AmpLink (Output Only): 8 Low Latency (< 21µs), 48 kHz (Requires shielded Cat 5/6) USB Device: Micro-B Type, Stereo In/Out USB Host: Type A (For Future Use)
Control Inputs	Inputs (Control): 5 Analog or Digital Inputs, 2 Kilohms Internal Pull-Up Resistor to 5 V, 0.15″ / 3.81 mm Detachable Euroblock, 6-Pin Analog Input Voltage Range: 0 to 3.3 V (Maximum 5 V) Digital Input Voltage Range: 0 V to 3.3 V (Threshold Voltage = 1.6 V)
Control Output	Outputs (Control): 5 Digital Outputs, 0.15″ / 3.81 mm Detachable Euroblock, 6-Pin Output Voltage High: 8 V (Open Circuit), 2.5 V at 10 mA; Low: <1 V at 100 mA, Push Pull
Indicators & Controls	Display: 256 x 64 OLED with Rotary Encoder LED Status Indicators: Power/Status Audio Signal Indication: On Display
General	PC Configuration Software: ControlSpace Designer Software Version 5.5 or Later Network Control: Ethernet (RJ-45), 1 Gbps RS-232/485 Ports: RS-232 (DTE) and Bose CC-16 (RS-485 Master) 0.15″ / 3.81 mm Detachable Euroblock, 3-Pin
Operating Temperature	32 to 104°F / 0 to 40°C
Cooling System	2 Variable-Speed Fans, Side Venting
Compliance	Safety: UL60065 (8th Edition), CAN/CSA-C22.2 No.60065 (8th Edition), IEC/EN60065 (8th Edition) UL62368-1 (2nd Edition), CAN/CSA C22.2 No. 62368-1-14 (2nd Edition), IEC/EN 62368-1 (2nd Edition) EMC: EN 55032:2015, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 55035:2017 FCC Part 15B Class A, AS/NZS CISPR 32:2015, ICES-003 Class A, CISPR13
Power	Mains Voltage: 85 to 264 VAC 50/60 Hz AC Power Consumption: 35 W Typical at 104 °F (40 °C) Ambient Mains Connector: IEC 60320-C14 (Inlet) Power Dissipation: 60 W (205 BTU, 52 kcal)
Dimensions	1.7 x 19.0 x 11.1″ / 4.3 x 48.3 x 28.2 cm
Weight	7.1 lb / 3.2 kg