คีย์บอร์ดซินธิไซเซอร์ Behringer Model D Eurorack-sized Analog Monosynth Module with 3 Oscillators, Lowpass/Highpass VCF, Filter and Amp Envelopes, LFO, Portamento, A-440 Tuning Reference, CV I/O, MIDI In/Thru, and USB-MIDI
ราคาไม่รวมภาษีมูลค่าเพิ่ม…..
฿14,000.00
คีย์บอร์ดซินธิไซเซอร์ Behringer Model D Eurorack-sized Analog Monosynth Module with 3 Oscillators, Lowpass/Highpass VCF, Filter and Amp Envelopes, LFO, Portamento, A-440 Tuning Reference, CV I/O, MIDI In/Thru, and USB-MIDI
Based on the authentic synthesizer structure and ladder-style filter design found in iconic and legendary synths of the ’70s, the Behringer Model D is a three-oscillator analog synthesizer with a pure analog signal path and a dedicated and fully analog triangle/square wave LFO. The instrument utilizes matched transistors and JFETs, precision 0.1% thin-film resistors, and polyphenylene-sulfide capacitors, which allow for flexible sound shaping capabilities, resulting in super-fat basses and lead tones, mind-bending effects, and progressive organ sounds.
The three VCOs offer a wide range of waveforms for sculpting sound. VCOs 1&2 include triangular, triangular/saw, saw, square, wide pulse, and narrow pulse, while VCO3 features triangular, reverse saw, saw, square, wide pulse, and narrow pulse. Additionally, all 3 VCOs can be adjusted across a wide, 6-octave range (LO, 32′, 16′, 8′, 4′, and 2′). At the heart of the Model D beats the highly flexible 24 dB ladder-style filter with controls for filter cutoff, emphasis, and contour. The filter can be switched between high-pass and low-pass, while the dedicated envelope allows the filter to be shaped over time. What’s more, the filter can be key-tracked for realistic recreations of acoustic instruments.
Synthesizer Structure | Number of Voices: Monophonic Type: Analog VCO: 3 x voltage-controlled oscillators (0.1 Hz to 20 kHz in 6 overlapping ranges) LFO: 1 x low-frequency oscillator (0.05 Hz to 200 Hz, up to 300 Hz with external CV input) VCF: 1 x voltage-controlled filter, switchable low-pass or high-pass (24 dB/octave slope) Envelopes: VCA, VCF |
Line Inputs and Outputs | High Output: 1/4″ / 6.3 mm TS, unbalanced, maximum 0 dBu High Output Impedance: 1.2 kOhms Low Output: 1/4″ / 6.3 mm TS, unbalanced, 30 dB below high output Low Output Impedance: 1 kOhms Headphones: 1/8″ / 3.5 mm TRS, unbalanced, maximum -3.5 dBu Headphones Output Impedance: 8 Ohms |
Control Voltage | Inputs: 1/8″ / 3.5 mm (TS) Modulation Source: Noise is the modulation source if there is no connection present Oscillator 1: 1 V per octave LFO: -5 V to +5 V External Input Impedance: 1 MOhm Cutoff Frequency: 0 to +5 V controls the cutoff frequency Loudness: 0 to +5 V controls the loudness Filter Contour: +5 V gate input triggers the filter contour Loudness Contour +5 V gate input triggers the loudness contourOutputs: 1/8″ / 3.5 mm (TS) LFO Triangular Waveform: +/- 2 V LFO Square Waveform: +/- 2 V Mixer Output: 0 dBu maximum Filter Contour: 0 to +4 V Loudness Contour: 0 to +4.6 V Main Audio Output: 0 dBu maximum |
USB | Type: Class-compliant USB 2.0, Type-B Supported Operating Systems: Windows XP or higher macOS 10.6.8 or higher |
MIDI Connectors | In/Thru: 2 x 5-pin DIN |
Controllers | Knobs Tune: -2 to +2 Glide: 0 to 10 Modulation Mix: OSC 3 or filter EG to noise/ext mod source or LFO Modulation Depth: 0 to 10 LFO Rate: 0 to 10Switches Modulation Source: OSC 3 or filter EG Modulation Source: Noise or external modulation source or LFO LFO Waveform: Triangular or square |
Oscillators | Knobs Range (OSC 1, 2, and 3): LO, 32′, 16′, 8′, 4′, 2′ Frequency (OSC 2 and 3): -7 to +7 Waveform (OSC 1 and 2): Triangular, triangular/saw, saw, square, wide pulse, narrow pulse Waveform (OSC 3): Triangular, reverse saw, saw, square, wide pulse, narrow pulse Switches: Oscillator modulation on/off OSC 3 control (by keyboard) on/off |
Mixer Section | Knobs Volume (OSC 1, 2, and 3): 0 to 10 Volume (External Input): 0 to 10 Volume (Noise): 0 to 10Switches OSC 1, 2, and 3: On/off External Input: On/off Noise: On/off Noise Source: Pink or whiteLED: Overload |
Filter | Knobs Cutoff Frequency: -4 to +4 Filter Emphasis: 0 to 10 Amount of Contour: 0 to 10 Attack: 1 ms to 10 s Decay: 4 ms to >35 s Sustain: 0 to 10Switches Filter Mode: Low-pass/high-pass Filter Modulation: On/off Keyboard Control 1: On (1/3) or off Keyboard Control 2: On (2/3) or off Filter Decay: On/off |
Output | Loudness Contour Dynamic Range: 80 dB
Knobs Switches LED: Power |
Operating Temperature Range | 41 to 104°F / 5 to 40°C |
Power | External Power Adapter: 12 VDC, 1000 mA Power Consumption: 7 W maximum |
Dimensions (H x W x D) | 3.5 x 14.7 x 5.4″ / 90 x 374 x 136 mm |
Weight | 3.7 lb / 1.7 kg |