ซินธิไซเซอร์ BEHRINGER Neutron Semi-Modular Analog Synth

คีย์บอร์ดซินธิไซเซอร์ Behringer Neutron Semi-Modular Analog Synth, Paraphonic Analog and Semi-Modular Synthesizer with Dual 3340 VCOs, Multi-Mode VCF, 2 ADSRs, BBD Delay and Overdrive Circuit in a Eurorack Format

ราคาไม่รวมภาษีมูลค่าเพิ่ม…..

฿14,000.00

สอบถามและสั่งซื้อสินค้า

Description

Behringer Neutron Paraphonic Analog and Semi-Modular Synthesizer

คีย์บอร์ดซินธิไซเซอร์ Behringer Neutron Semi-Modular Analog Synth, Paraphonic Analog and Semi-Modular Synthesizer with Dual 3340 VCOs, Multi-Mode VCF, 2 ADSRs, BBD Delay and Overdrive Circuit in a Eurorack Format

The Behringer Neutron is a semi-modular analog synthesizer with a pure signal path based on authentic VCO, VCF, VCA, and state-variable filter designs. The instrument can create huge bass lines, edgy lead tones, stunning effects, and progressive organ sounds, making it well suited for musicians, producers, DJs, and sound designers.

The Neutron can be used in monophonic or paraphonic modes. In mono mode, the synthesizer responds to a single note performance, while in paraphonic mode both 3340 oscillators are allowed to be independently controlled. The semi-modular design allows you to start working with the Neutron straight out of the box, as all necessary connections are prewired (no cables needed). The 36-in/24-out patchbay provides a vast array of potential connections that are 100% Eurorack compatible. What’s more, the synthesizer can be removed from its included enclosure and placed inside any standard Eurorack case (80hp).

Features:

  • Paraphonic synthesizer with authentic dual 3340 analog oscillators for remarkable music creation
  • Pure analog signal path based on legendary VCO design to recreate classic sounds
  • Semi-modular architecture with default routings with no patching needed for immediate performance
  • Oscillator waveform control blends seamlessly between 5 shapes (tone mod, pulse, sawtooth, triangle, sine)
  • Individual pulse width / tone mod control
  • Paraphonic mode allows both oscillators to be independently controlled
  • Self-oscillating, multimode VCF with dual output (e.g. LP+HP available on jacks)
  • Two analog ADSR generators for modulation of VCF and VCA
  • Multiple stage analog delay based on legendary BBD (bucket brigade delay) technology
  • Flexible LFO with five waveform shapes, MIDI clock sync and key sync
  • Noise generator dramatically expands waveform generation
  • Overdrive circuit adds rich analog warmth and edge to your sounds
  • 36 controls and 7 buttons give you direct and real-time access to all parameters
  • Utility functions including attenuators, multiples, slew rate limiter, and summers for creative patching flexibility
  • 32-in/24-out jack matrix for an incredible amount of patching options
  • Patchable audio rate sample and ho ld with glide for added creativity
  • Powerful headphone output with dedicated level control
  • External audio input for processing external sound sources
  • Comprehensive USB-MIDI implementation for connection to keyboard/sequencer

Specifications

Synthesizer Structure Number of Oscillators: 2 x V3340
Type: Analog
Oscillators: 2 (0.7 Hz to 55 kHz Across Four Ranges)
LFO: 1 (0.01 Hz to 10 kHz)
VCF: 1 Switchable: Low Pass, Band Pass, or High Pass (12 dB/Octave Slope), Dual Output
Envelopes: 2 Analog Envelope Generators
Connectivity External Input: 1/4″ / 6.35 mm TS, Unbalanced, 100 kOhms Impedance
Output: 1/4″ / 6.35 mm TRS, Balanced, Max. 12 dBu
Headphones: 1/4″ / 6.35 mm TRS, Balanced
Headphones Output Impedance: 8 Ohms
MIDI In/Out (Soft Thru): 5-Pin DIN/ 16 Channels
USB (MIDI): USB 2.0 Type-B
Oscillators Controls:
Tune (OSC 1&2): ±1 Octave (8′, 16′ or 32′) or ±10 (Full Range)
OSC Mix: (Linear Blend Control between OSC 1&2)
Shape (OSC 1&2): Tone Mod, Square, Sawtooth, Triangular, or Sine
Pulse Width: 0 to 100% (OSC 1&2)Switches:
Range (OSC 1&2): 8′, 16′, or 32′ or Full Range (All 3 LEDs)
OSC Sync: On/Off
Paraphonic: On/OffLED:
Octave (OSC 1&2) 8′, 16′ or 32′ or ±10 (all 3 LEDs)
Shape (OSC 1&2): Tone Mod, Square, Sawtooth, Triangular, or Sine
Envelope Control Attack: 300 μs to 5 sec (Linear Attack)
Decay: 2.4 ms to 10 sec (Exponential Decay)
Sustain: 0 V to 9 V
Release: 1.5 ms to 6 sec (Exponential Release)
Output Volume Control: 0 to 100%
MIDI LED: Gate Signal
Sample & Hold Rate Control: 0.26 to 28 Hz (Can Be Clocked from External Source)
Glide Control: 500 μs to 1 sec
LED Rate: 0.26 to 28 Hz (Can Be Clocked from External Source)
Slew Rate Slew Rate: 1 ms to 3 sec
Portamento Time: 0 to 10 sec
Attenuator Attenuator 1: +4 dB to -∞
Attenuator 2: 0 dB to -∞
Filter Controls
Cutoff Frequency: 10 Hz to 15 kHz
Resonance: 0 to 10 (Capable of Self Oscillation)
Modulation Depth: 0 to 100%
Envelope Depth: 0 to 100%
Noise: 0 to 100%
VCA Bias: 0 to 100%Switches
Filter Mode: High Pass, Band Pass, and Low Pass
Filter Key Track: On/OffLED
Filter Mode: High Pass, Band Pass, and Low Pass
LFO Controls:
Shape: Sine, Triangle, Sawtooth, Square, and Ramp
Rate: 0 to 10  (0.01 Hz to 10 kHz)Switches:
Key Sync: On/OffLED:
Rate/Level Indicator
Shape: Sine, Triangle, Sawtooth, Square, and Ramp
Effects Delay:
Time: 25 to 640 ms
Repeats: 0 to 100%
Mix: 0 to 100%Overdrive Controls:
Drive: 0 to 11
Tone: 0 to 10
Level: 0 dB to -∞
Overdrive LED: Drive Amount Indicator
Patch Points Inputs (TS 1/8″ / 3.5 mm):
OSC 1 Control Voltage: 1 V per Octave
OSC 2 Control Voltage: 1 V per Octave
OSC 1&2 Control Voltage: 1 V per Octave
Invert In: Inverts Voltage
Shape 1 Control Voltage: -5 V to +5 V
Shape 2 Control Voltage: -5 V to +5 V
Pulse Width 1 Control Voltage: -5 V to +5 V
Pulse Width 2 Control Voltage: -5 V to +5 V
VCF In: Signal Input
Freq Mod Control Voltage: -5 V to +5 V
Resonance Control Voltage: -5 V to +5 V
Overdrive In: Signal input
VCA In: Signal input
VCA Control Voltage: -9 V to +9 V
Delay In: Signal Input
Delay Time Control Voltage: -5 V to +5 V
E Gate 1 Control Voltage: -5 V to +5 V (Envelope Triggers at 1.5 V)
E Gate 2 Control Voltage: -5 V to +5 V (Envelope Triggers at 1.5 V)
Sample & Hold In: Signal Input
Sample & Hold Clock Control Voltage: -5 V to +5 V (S&H Triggers at 3 V)
LFO RATE
Control Voltage: -5 V to +5 V
LFO Shape Control Voltage: -5 V to +5 V
LFO Trig Control Voltage: -5 V to +5 V (S&H Triggers at 1.6 V)
MULT (Multiple) Input Signal is Duplicated on Mult 1 and Mult 2 Outputs
ATT 1 In: Signal Input
ATT 1 CV Control Voltage: -5 V to +5 V
ATT 2 In: Signal Input
SLEW In: Signal or CV Input
SUM 1 (A): Signal Input or CV Input
SUM 1 (B): Signal Input or CV Input
SUM 2 (A): Signal Input or CV Input
SUM 2 (B): Signal Input or CV InputOutputs (TS 1/8″ / 3.5 mm):
OSC 1: Max. +14 dBu
OSC 2: Max. +14 dBu
OSC Mix: Max. +14 dBu
VCF 1: Max. +12 dBu
VCF 2: Max. +12 dBu
Overdrive: Max. +18 dBu
VCA: Max. +18 dBu
Output: Max. +15 dBu
Noise: Max. +18 dBu
ENV 1 Control Voltage: 0 V to +9 V
ENV 2 Control Voltage: 0 V to +9 V
Invert: Inverts Signals Up to ±9.5 V
LFO Control Voltage: -5 V to +5 V
LFO UNI Control Voltage: 0 V to +5 V
Sample & Hold: Tracks Input Voltage Up to a Maximum of 9.5 V
MULT 1: Tracks Input Voltage Up to a Maximum of 9.5 V
MULT 2: Tracks Input Voltage Up to a Maximum of 9.5 V
MIDI Gate Control Voltage: 0 V to +3.3 V
ATT 1: Control Voltage -9.5 V to +9.5 V (Dependent on Input Signal)
ATT 2: Max Output Voltage Dependent on Input Signal
Slew Control Voltage: -9.5 V to +9.5 V (Dependent on Input Signal)
SUM 1 Control Voltage: -9.5 V to +9.5 V (Dependent on Input Signals)
SUM 2 Control Voltage: -9.5 V to +9.5 V (Dependent on Input Signals)
Assign Control Voltage: 0 V to +5 V
Operating Temperature 41 to 104°F / 5 to 40°C
Power External Power Adapter: 12 VDC, 1000 mA (12 W)
Power Consumption: 7.5 to 9 W typical
Horizontal Pitch 80hp
Dimensions (H x W x D) 3.7 x 16.7 x 5.4″ / 94.0 x 424.2 x 137.2 mm
Weight 4.4 lb / 2.0 kg

โทร. : 022031821 , 026414744 ext 13
สายด่วน : 099-8759336, 081-2399040 (Eng), 089-6915832

Line : @soundspacethai

หรือส่งข้อความด้านล่างเพื่อติดต่อเราทาง Facebook