ออโออินเตอร์เฟส Audient iD14 MKII USB Audio Interface

ออโออินเตอร์เฟส Audient iD4 10-in/6-out USB-C Audio Interface with 2 Microphone Preamps, USB3.0 Bus Powered, 1 JFET DI, 4 Line Outputs, ADAT Optical Input, Bus Power, 2 Headphone Outputs, and Software Bundle Mac/PC

ราคาไม่รวมภาษีมูลค่าเพิ่ม…..

฿11,500.00

สอบถามและสั่งซื้อสินค้า

Category: ออดิโออินเตอร์เฟส (Audio Interface) Tag: Audient

Description

Audient iD14 MKII Desktop 10×6 USB Type-C Audio Interface

The Audient iD14 MKII, a high-performance 10×6 USB type-C audio interface designed by respected experts, for musicians, producers, podcasters, voiceover artists, and more. The MKII edition not only boasts a fresh exterior, but new wonders inside, such as improved sonics, expanded outputs, and audio loopback for content creators.

What’s New in the MKII

Redesigned appearance
USB Type-C connectivity
USB 3.0 bus powered
True phantom power over USB
Additional monitor/line outputs (four on the MKII versus two on the original iD14)
Two headphone outputs (1/4″ and 3.5mm), ready to drive headphones up to 600 ohms
Improved audio performance specs
Audio loopback for content creators

Features:

Updated cosmetics — A sleek new gunmetal housing and cleaner top-down interface gives the iD14 MKII a look and workflow that are better built to stand the test of time in your studio.
USB 3.0 speeds — With a data transmission cap that’s 10 times higher than its predecessor, the iD14 MKII boasts a much snappier connection to your laptop. This translates to lower latency and much-reduced round-trip speeds.
Forward-looking USB-C connection — A USB-C to USB-C connection (cable included) makes the MKII version of the iD14 compatible with even more modern devices on the market. It’s completely USB 3.0 bus powered, so you can produce great music and content beyond the studio walls.
Even better audio performance — The previous iD14 was one of the cleanest and quietest interfaces in its class. We’re pleased to report that the iD14 MKII is even better, with an improved dynamic range on both the ADC (+5dB) and DAC (+9dB). This means, whether you’re tracking or monitoring, the MKII is your key to a cleaner, quieter studio.
Studio-grade headphone amp — A new 600Ω headphone amplifier with dual independent outputs (1/4″ and 1/8″) makes the iD14 the ideal front end for track monitoring to casual listening.
Free ARC software suite — Thanks to its included software bundle, the iD14 MKII is an even better option for budding songwriters and producers. Registering your product online gets you access to Steinberg’s Cubase DAW, the Two Notes Wall of Sound cab simulation, a host of virtual instruments from Waldorf and Gforce, and three introductory courses from Produce Like a Pro.

Specifications

Form Factor	Tabletop
Display	2 x Multi-Segment LED Meter
Channels of I/O	Analog: 2 Inputs / 6 Outputs at 96 kHz Digital: 8 Input / 0 Output at 48 kHz
Maximum Sampling Rate	96 kHz / 24-Bit
Number of Microphone Preamps	2 Preamps
Input Level Adjustment	2 x Knob
Expansion Slots	None
Pad	None
Gain/Trim Range	Mic/Hi-Z Inputs: 58 dB Hi-Z Inputs: 40 dB
High-Pass Filter	None
Solo/Mute	None

Connectivity

Analog Audio I/O	2 x Combo XLR-1/4″ TRS Balanced Mic/Line Input 1 x 1/4″ TRS Unbalanced Hi-Z Input (Front Panel) 4 x 1/4″ TRS Balanced Line/Monitor Output 1 x 1/4″ TRS Unbalanced Headphone Output (Front Panel) 1 x 1/8″ / 3.5 mm TRS Unbalanced Headphone Output (Front Panel)
Phantom Power	48 V ± 4 V, Selectable On/Off (Selectable on Individual Inputs)
Phantom Power Current	10 mA per Channel
Digital Audio I/O	1 x TOSLINK Optical ADAT / S/PDIF Input (S/MUX Support)
Host Connection / USB	1 x USB Type-C (USB 3.0 / 3.1 Gen 1)
USB (Non-Host)	None
Sync I/O	None
Network I/O	None
MIDI I/O	None
Wireless Connectivity	None

Performance

Frequency Response	A/D Converters: 10 Hz to 40 kHz ±0.5 dB D/A Converters: 10 Hz to 40 kHz ±0.1 dB Headphone Outputs: 10 Hz to 40 kHz ±0.25 dB Mic, Line Inputs: 10 Hz to 40 kHz ±0.5 dB (Min Gain) 20 Hz to 22 kHz ±1 dB (Max Gain) Hi-Z Inputs: 10 Hz to 20 kHz ±0.5 dB
Maximum Input Level	Mic Inputs: +12 dBu Line Inputs: +21 dBu Hi-Z Inputs: +10 dBu
Maximum Output Level	Headphone Outputs: +5.46 Vrms (600-Ohm Load)
Headphone Output Power	223 mW into 30 Ohms (Max) 280 mW into 62 Ohms (Max) 100 mW into 600 Ohms (Max)
Impedance	Mic Inputs: 2.8 Kilohms (Balanced) Line Inputs: > 8 Kilohms (Balanced)
Dynamic Range	A/D Converters: 120 dB (A-Weighted) D/A Converters: 125.5 dB (A-Weighted) Headphone Outputs: 125.5 dB (A-Weighted)
SNR	Mic/Line Inputs: 101 dBu (A-Weighted) Hi-Z Inputs: 100 dBu (A-Weighted)
THD+N	Mic/Line Inputs: 0.0017% (at 0 dBu) Hi-Z Inputs: 0.1% (at 0 dBu) A/D Converters: < 0.001% (at -1 dBFS) D/A Converters: < 0.0006% (at -1 dBFS) Headphone Outputs: < 0.0009% (at -1 dBFS)
Crosstalk	Mic Inputs: > -100 dB Line Outputs: > 120 dB Headphone Outputs: > 116 dB
EIN	Mic/Line Inputs: -129 dBu A-Weighted
CMRR	Mic/Line Inputs: > -75 dB (1 kHz)

Digital Audio

dBFS Reference Level	+12 dBu = 0 dBFS
Sample Rates	44.1 / 48 / 88.2 / 96 kHz
Sample Rate Conversion	None
Bit Depths	24-Bit
Latency	0.65 ms at 44.1 kHz (Dependent on Buffer Size, Input to Output) 0.31 ms at 96 kHz (Dependent on Buffer Size, Input to Output)
Sync Sources	ADAT, Internal, S/PDIF
Memory Card Slot	None

Compatibility

OS Compatibility	macOS 10.11.6 or Later macOS 11.1 or Later Windows 7 or Later
Included Software	Cubase LE
Compatible Software (Not Included)	Any Core Audio (Mac) Compliant Software
Included Plug-Ins	Virtual Instruments: Steinberg Retrologue 2 G-Force M-Tron Pro LE Waldorf Edition 2 LE Guitar & Bass: Two Notes Torpedo Wall of Sound
Supported Drivers/API & Plug-Ins	Proprietary
Processor Requirement	Mac: Intel Apple M1 PC: 1.6 GHz Intel Core 2
RAM Requirements	1 GB
Mobile Device Compatibility	None
Required Hardware	Available USB Type-C Port USB Cable (Included)
Internet Connection	Required for Registration, Software/Driver Download