สเตอริโอไดเร็คบ๊อกซ์ Radial Trim-Two เป็น Di แบบ Passive Stereo พร้อมโวลุ่มคอนโทรล, For Line-Level Sources, Connects Laptops, Consumer Devices, Variable Volume Control, Choice of RCA, 1/4″ and 1/8″ connectors
ไม่รวมภาษีมูลค่าเพิ่ม…..
฿5,400.00
สเตอริโอไดเร็คบ๊อกซ์ Radial Trim-Two เป็น Di แบบ Passive Stereo พร้อมโวลุ่มคอนโทรล, For Line-Level Sources, Connects Laptops, Consumer Devices, Variable Volume Control, Choice of RCA, 1/4″ and 1/8″ connectors
The Trim-Two allows you to connect any playback device and interface it with balanced pro audio equipment without signal loss or hum and buzz from ground loops. It features two transformers which isolate and balance the audio output from your source device, eliminating noise and allowing you to use long cable runs without signal degradation.
A handy mono sum switch makes it easy to reduce the output channel count or send the same signal to two destinations at once, and an accessible level control gives you the ability to adjust levels in an instant. Multiple input connector types make it easy to hook up any consumer line level playback source, from laptops & smartphones to DJ equipment.
The completely passive design means that you never have to worry about powering the Trim-Two, making it truly plug & play.
Audio
Audio Circuit Type | Passive, transformer based |
Channels | Dual Channel (Stereo) |
Frequency Response | 20 Hz to 20 kHz |
Dynamic Range | >100 dB |
Maximum Input | +20 dB @ 20 Hz |
Total Harmonic Distortion | 0.009% |
Phase Deviation | |
Input Impedance | 10 kOhms, unbalanced |
Output Impedance | 2.8 kOhms, balanced |
I/O
Connectors | 2x 1/4″ (6.3 mm) inputs 2x RCA (L, R) inputs 1x 1/8″ (3.5 mm) input 2x XLR-M (L, R) outputs |
Transformer | Custom |
Shield | Copper foil |
Input Pad Switch | Variable level control |
Summing | Mono Sum: Merges left + right sources to mono |
Ground Lift | Disconnects pin-1 @ both XLR outputs |
XLR Configuration | AES standard (pin-2 Hot) |
General
Construction | 14-gauge steel chassis & outer shell |
Finish | Durable powder coat |
Power | Passive, no power required |
Operating Conditions | For use in dry locations only between 41 to 104°F (5 and 40°C) |
Dimensions (WxHxD) | 3.3 x 5.0 x 2″ (84 x 127 x 48 mm) |
Weight | 1.55 lb (0.7 kg) |
Packaging Info
Package Weight | 1.715 lb |
Box Dimensions (LxWxH) | 6.35 x 4.35 x 2.95″ |