เครื่องขยายเสียง CROWN T3 Power Amplifier 450W
แอมป์ขยายเสียง CROWN T3 เป็นเครื่องขยายเสียงจาก CRORN ในตระกุล T-Series มีกำลังขับ 450 วัตต์ x 2 ชาแนล ที่ 4 โอหม์, ตอบสนองความถี่ 20Hz-20kHz, Rear panel components Output mode switch: stereo
ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม…..
฿17,900.00 ฿12,900.00
Description
CROWN T3 Power Amplifier 450W
แอมป์ขยายเสียง CROWN T3 เป็นเครื่องขยายเสียงจาก CRORN ในตระกุล T-Series มีกำลังขับ 450 วัตต์ x 2 ชาแนล ที่ 4 โอหม์, ตอบสนองความถี่ 20Hz-20kHz, Rear panel components Output mode switch: stereo, parallel, bridge; input sensitivity switch: 0.775V or 1.4V
Crown T3 450W 2-channel Amplifier Crown T3 is part of Crown’s T line, which is a line of amplifiers that will elevate the quality of your environment for concerts, parties and large events.
The T series has equipment with six LEDs included, which indicate the presence of signal, clip and fault per channel, two gain controls and can be used in stereo, parallel and bridge-mono mode.
Plus, the Crown T amplifiers feature protection from power outages, non-charging and frequency interference that gives you greater peace of mind during your performances!
Features:
- Parallel stereo mono mode in brigde.
- Selectable input sensitivity: 0.665V and 1.4V.
- RCA and XLR input connectors; Output Speakon.
- 2 gain controls, a power switch, a power LED, 2 groups of six LEDs correspond respectively.
- Channel at work, cut and fault status.
Specifications
| Frequency response | 20Hz-20kHz, + 0 / -1dB |
| Total harmonic distortion (THD) | <0.5%, 20Hz-20kHz |
| Intermodulation distortion | = / <0.35% |
| Conversion Rate | > 10V / us |
| Voltage gain | 31dB |
| Damping factor | > 200 (8Ω, 10 Hz-400 Hz) |
| Signal to noise ratio (20 Hz-20 kHz below rated power, A-weighted sound level) | > 100 dB |
| Crosstalk | -75dB @ 1kHz, -59dB @ 20kHz, based on rated output power |
| Input sensitivity | 0.775V or 1.4V (rated output power 8Ω) |
| input resistance | 20kΩ balanced, 10kΩ unbalanced |
| Input connector | One balanced XLR connector or one unbalanced RCA connector per channel |
| Output connector | One 4-pin Speakon ® and one pair of posts per channel |
| Front panel components | Power switch, channel gain control knob |
| Rear panel components | Output mode switch: stereo, parallel, bridge; input sensitivity switch: 0.775V or 1.4V |
| Power Indicator | Blue LED |
| Signal Indicator | One green LED per channel |
| Clip Indicator | One yellow LED per channel |
| Fault Indicator | One red LED for each channel, indicating that the channel is closed |
| Power cables | Power plug: 10A, 250V; power cord: CCC 3×1.5mm 2 |
| protection | Protection circuit against short circuit, no load, switch noise, radio interference |
| Ventilation | Backward air convection mechanism |
| Cooling | Internal air exhaust cooling, fan cooling, fast adjustment, temperature protection |
| Dimensions (W × H × D) | 19 ”x 3.46” x 12.45 ”(482 mm x 88 mm x 316.4 mm) |
| Net Weight | 28.0 lb (12.7 kg) |
| Shipping weight | 32.4 lb (14.7 kg) |
Related Products
