ไมโครโฟน Lewitt MTP 940 CM เป็นไมค์แบบ Condenser Mic for For Live Sound and Recording, 3 Switchable Polar Patterns Cardioid, wide cardioid, supercardioid, ตอบสนองความถี่ 20 Hz to 20 kHz, 48V Phantom Power, Gold-Plated 3-Pin XLR Connector
ราคาไม่รวมภาษีมูลค่าเพิ่ม…
฿25,000.00 ฿19,900.00
ไมโครโฟน Lewitt MTP 940 CM เป็นไมค์แบบ Condenser Mic for For Live Sound and Recording, 3 Switchable Polar Patterns Cardioid, wide cardioid, supercardioid, ตอบสนองความถี่ 20 Hz to 20 kHz, 48V Phantom Power, Gold-Plated 3-Pin XLR Connector
The MTP 940 CM Condenser Performance Handheld Microphone by Lewitt Audio is for capturing audio. It is used for applications such as live sound, studio recording, lead vocals, background vocals, conference rooms, lecture halls, boardrooms, and more. It features three switchable polar patterns; wide cardioid, cardioid, and supercardioid. It is designed to capture most sound sources from lead vocals and choirs to classic unplugged situations with a singer and an acoustic instrument.
This MTP 940 CM microphone has a frequency response range of 20 Hz to 20 kHz and is powered by 48V phantom power. It is built with a three-step high-pass filter that makes it possible to directly influence the proximity effect, adapting it in the best possible way to the sound source. It also features a three-position pre-attenuation pad that allows for extreme SPL environments. LEDs can be switched off if desired, but when switched on allow you to check microphone settings quick and easy. If you’re looking for a studio mic to use onstage or when recreating a live atmosphere in the studio, the MTP 940 CM is a good choice. The connector is a gold-plated 3-pin XLR. A shock mount and carrying pouch are included.
Operating Principle | Acoustical: Pressure gradient transducer, externally polarized |
Directional Pattern | Cardioid, wide cardioid, supercardioid |
Frequency Range | 20 Hz to 20 kHz |
Sensitivity | 10 mV / Pa (-40 dBV), cardioid |
Signal to Noise Ratio | 85 dB-A |
Equivalent Noise Level | 9 dB-A, cardioid (IEC 61672-1) |
Dynamic Range | Mic Amp: 135 dB-A |
Maximum SPL for 0.5% THD | 144 dB, 0 dB pre-attenuation 150 dB, 6 dB pre-attenuation 156 dB, 12 dB pre-attenuation |
Pad | Pre-Attenuation: 6 dB, 12 dB, switchable |
Bass Cut Filter | Slope: 12 dB / octave at 80 Hz 12 dB / octave at 160 Hz |
Impedance | Rated: < 150 Ω Rated Load Impedance: > 1000 Ω |
Supply Voltage | 48 V +/- 4 V (IEC 61938) |
Current Consumption | 5.5 mA (IEC 61938) |
Connector | Gold-plated 3-pin XLR |
Dimensions (Diam. x H) | 2.0 x 7.2″ (51 x 183 mm) |
Weight | 11.7 oz (332 g) |