ไมค์จ่อเครื่องดนตรี sE Electronics sE8 เป็นไมค์สำหรับจ่อเครื่องดนตรี ชนิดคอนเด็นเซอร์ มีรูปแบบการรับเสียงแบบ Cardioid Polar Pattern, Gold-Sputtered, Small-Diaphragm Condenser, ตอบสนองความถี่ 20 Hz to 20 kHz, Includes Mic Clip with Thread Adapter, Includes Windscreen
ราคาไม่รวมภาษีมูลค่าเพิ่ม…
฿6,990.00 ฿6,900.00
ไมค์จ่อเครื่องดนตรี sE Electronics sE8 เป็นไมค์สำหรับจ่อเครื่องดนตรี ชนิดคอนเด็นเซอร์ มีรูปแบบการรับเสียงแบบ Cardioid Polar Pattern, Gold-Sputtered, Small-Diaphragm Condenser, ตอบสนองความถี่ 20 Hz to 20 kHz, Includes Mic Clip with Thread Adapter, Includes Windscreen
The sE Electronics sE8 is is a small-diaphragm condenser microphone with a hand-made, gold-sputtered cardioid capsule. Suitable for live and recording scenarios, the microphone has been engineered to provide a balanced, transparent, and natural sound, as well as a detailed transient response.
The sE8 boasts inherently low self-noise for capturing audio in particularly quiet situations. It also sports an SPL high enough to handle drums, and a dynamic range large enough to handle record triple-piano to triple-forte velocities accurately.
Two switchable pre-attenuation pads are on hand, should you encounter particularly loud sound sources; one will shave off 10 dB, while the other will attenuate 20 dB. You’ll also note a switchable low-pass filter that rolls off low end at either 80 Hz or 160 Hz at 6 dB per octave.
To enhance durability—and to reject electrical interference and noise—the sE8 sports an all-metal chassis. The gold-plated, 3-pin XLR connector ensures signal reliability for a long time to come. Handcrafted and hand-tuned, microphone comes with a mic clip, a thread adapter, and a windscreen.
Sound Field | Mono |
Transducer | Condenser |
Tube | No |
Polar Pattern | Cardioid |
Frequency Range | 20 Hz to 20 kHz |
Signal to Noise Ratio | Cardioid: 81 dB |
Equivalent Noise Level | Cardioid: 13 dB A-Weighted |
Maximum SPL | Cardioid: 159 dB SPL Peak |
Pad | -10 dB -20 dB |
Impedance | Cardioid: 110 Ohms |
Load Impedance | 1 kOhms |
Sensitivity | Cardioid: 25 mV/Pa |
Low-Cut Filter | 6 dB/Octave @ 80 Hz 6 dB/Octave @ 160 Hz |
General | |
---|---|
Output Connectors | 1 x 3-Pin XLR |
Operating Current Consumption | 2.7 mA |
Operating Voltage | 48 V |
Length | 4.72″ / 120 mm |
Diameter | 0.91″ / 23 mm |
Weight | 4.97 oz / 141 g |