Sale

ลำโพง PreSonus ULT10 Powered Speaker 10″

ลำโพงแบบมีกำลังขยายในตัว PreSonus ULT10 เป็นตู้ลำโพง 2 ทาง ขนาดดอกลำโพง 10 นิ้ว LF driver, เสียงแหลม 1.75 นิ้ว HF horn, มีกำลังขับ 1300 วัตต์ Peak, 650W

ราคาไม่รวมภาษีมูลค่าเพิ่ม…..เป็นราคาใบละ…

~~฿41,900.00~~ ฿33,500.00

สอบถามและสั่งซื้อสินค้า

Category: ลำโพงแบบไม่มีกำลังขยายในตัว (Passive) Tag: PreSonus

Description

PreSonus ULT10 1300W 10″ Powered Speaker

ลำโพงแบบมีกำลังขยายในตัว PreSonus ULT10 เป็นตู้ลำโพง 2 ทาง ขนาดดอกลำโพง 10 นิ้ว LF driver, เสียงแหลม 1.75 นิ้ว HF horn, มีกำลังขับ 1300 วัตต์ Peak, 650W continuous, Class-D Power, ตอบสนองความถี่ 60Hz-18kHz (-3dB)

The ULT10 from PreSonus is a 2-way 10″ active loudspeaker with a wide 110° horizontal and a 50° vertical dispersion horn for delivering even coverage and an ultra-long throw. It features 1300W of Class-D power (peak) and can be used as monitors in applications for sound reinforcement, PA systems, DJ setups, and more.

Featuring a custom low-frequency driver with a 2.5″ voice coil and a 1.75″ voice coil exit horn, the speaker is built with an onboard mixer with two combo XLR-1/4″ input jacks and an XMAX preamp. The rotatable waveguide-Pivot X110 horn delivers precise coverage. Plus, there are 3 operation-mode presets for the following: FOH (Front of House); for normal live setups, DJ; for music playback, and Mon; when using it as a wedge monitor.

Finally, the ULT10 2-way loudspeaker is built with top and side ergonomic handles, and the Chemline finished eucalyptus enclosure is designed with a tour-grade, 16-gauge steel grille. Additionally, a 35mm pole socket with a 6° downward tilt and integrated M10 rigging points for suspended installation are also included.

Features:

For Mobile & Permanent Installations
1300W of Class-D Power
10-Inch Low-Frequency Driver
90° Rotatable Horn
50 x 110° Focus Dispersion
Chemline Finish Eucalyptus Enclosure
Three Operation-Mode Presets
Onboard Mixer; 2-Combo XLR-1/4″ Inputs
24-Bit/96 kHz
Designed by WorxAudio

Specifications

Acoustic Specifications
Type	Active 2-way (biamped)
Frequency Response	Frequency Response (-3 dB): 60 Hz – 18 kHz Frequency Response (-10 dB): 55 Hz – 20 kHz
Nominal Coverage Angle	Nominal Coverage (-6 dB): 110 x 50°
Max Peak SPL	130 dB
Crossover Frequency	1.6 kHz

Transducers
LF Driver Size	10.0″ (25.4 cm) Voice Coil: 2.5″ (6.35 cm)
HF Driver Size	Voice Coil: 1.75″ (4.44 cm)

Amplifier
System Power	Total Power Output: 1300 W Peak (650 RMS) LF Power: 1000 W Peak (500 W RMS) HF Power: 300 W Peak (150 W RMS)
Cooling	Free air convection
THD	<0.05% (20 Hz – 20 kHz)
Dynamic Range	119 dB (A-weighted)
Bandwidth	20 Hz – 20 kHz

Connections
Input	Input Channels: 1 mic/line, 1 line
Connector Type	2 x combo XLR-1/4″
Mic Input Impedance	1 kOhm
Line Input Impedance	10 kOhms
Maximum Input	+22 dBu
Output Connectors	2 x XLR (M): Mix out, Direct out

Controls/Indicators
Controls	Mic/Line Level Line/Level Preset Select HPF On/Off Front LED On/Off
Indicators	DSP Preset, HPF On/Off, Front LED On/Off, Signal, Clip, Thermal

DSP
Presets	FOH, MON, DJ
HPF	100 Hz, 4th-order Linkwitz-Riley
Bit Depth	24-bit
Sample Rate	96 kHz

Protection
Amplifier Protection	Over-current, DC, over/under-voltage, over-temperature, high frequency
Limiter	Transducer Protection: Limiter

Mounting Options
Rigging Points	12 M10
Mounting	1.4″ / 35.0 mm, 2-position

Enclosure
Material	Eucalyptus plywood
Finish	Chemline polyurethane
Grille	Powder-coated steel
Monitor Angle	30°
Handles	2 (top and side)

General Specifications
Power	AC Power Input: 100 to 230 VAC, 50/60 Hz AC Power Consumption (1/8 Power): 150 W
Dimensions (H x W x D)	22.0 x 13.2 x 11.9″ / 558.8 x 335.3 x 302.3 mm
Weight	44.0 lb / 20.0 kg