Sale

แอมป์กีตาร์ MARSHALL Origin 20C Tube Combo Amp 10″

ตู้แอมป์กีตาร์ MARSHALL ORIGIN 20C เป็นตู้แอมป์กีตาร์แบบหลอด ขนาดกำลังขับ 20 วัตต์ ดอกลำโพงขนาด 10 นิ้ว Celestion Speaker, 1 Channel with Multiple Voicings, Built-In Effects Loop, DI Output with Emulated Loudspeaker, Included Footswitch

ราคาสินค้าไม่รวมภาษีมูลค่าเพิ่ม

฿25,000.00 ฿21,000.00

สอบถามและสั่งซื้อสินค้า

Description

Marshall Origin 20C Guitar Amplifier Combo Amp 20W

ตู้แอมป์กีตาร์ MARSHALL ORIGIN 20C เป็นตู้แอมป์กีตาร์แบบหลอด ขนาดกำลังขับ 20 วัตต์ ดอกลำโพงขนาด 10 นิ้ว Celestion Speaker, 1 Channel with Multiple Voicings, Built-In Effects Loop, DI Output with Emulated Loudspeaker, Included Footswitch

The Marshall Amplification Origin 20 is a 20W combo amplifier intended for use with electric guitars. It utilizes a tube-powered design, with Three ECC83 preamp tubes and two EL84 tubes for the power amp. With a 10″ Celestion V-type speaker, the amp gives you a tone that screams Marshall. This is a one channel amplifier with controls for bass, middle, treble, and volume.

Additionally, you’ll find a Tilt tone control, a filter independent from the main equalizer circuit. The Tilt knob changes the voice of the amp from a modern tone to a more vintage timbre.

Furthermore, the volume knob plays host to a pull-boost feature which adds some extra gain into the signal, giving you the pleasant breakup of tube-based distortion. With the included footswitch, you can control the pull-boost with a tap of your toe.

Turn your attention to the rear of the amplifier, and you’ll note three 1/4″ speaker outputs for routing to 16- and 8-Ohm cabinets. In addition to the 1/4″ footswitch input and 1/4″ DI output, you’ll see 1/4″ jacks for an external effects loop. This is useful for patching your outboard gear and pedals directly into the Origin 5’s signal path.

Features:

  • 20W Operation, 1×10″ Celestion Speaker
  • 1 Channel with Multiple Voicings
  • Volume, Bass, Mid, Treble & Tilt Knobs
  • Pull Boost on Volume Knob for Extra Gain
  • Built-In Effects Loop
  • 1/4″ DI Output with Emulated Loudspeaker
  • Multiple 1/4″ Speaker Outputs
  • Power-Reduction Switch, Included Footswitch

Specifications

Amplifier Type Tube
Output Power 20 W
Channels 1
Tube Types 3 x Preamp 12AT7/ECC82
2 x Power EL34/6CA7
Output Impedance 8/16 ohms Mono
Effects Loop Yes, Series
Built-In Effects None
Master Volume Yes
Inputs 1 x 1/4″ Mono Instrument
1 x 1/4″ Mono Effects Return
1 x 1/4″ Mono Footswitch
Outputs 3 x 1/4″ Mono External Speaker
1 x 1/4″ Mono DI
Tone Section Channel 1: Bass, Gain, Mid, Presence, Tone, Treble
Speaker Section
Speaker Through/Output 3x 1/4″
Configuration 1x 10″ Speaker(s)
Cabinet Type Straight Semi-Open Mono
Power Rating 30 W
Input Impedance 16 ohms Mono
Construction Material Not Specified by Manufacturer
Covering Not Specified by Manufacturer
General
Dimensions (WxHxD) 20.5 x 16.5 x 9.4″ / 520.0 x 420.0 x 240.0 mm Combo
Weight 30.64 lb / 13.9 kg Combo

โทร. : 022031821 , 026414744 ext 13
สายด่วน : 099-8759336, 081-2399040 (Eng), 089-6915832

Line : @soundspacethai

หรือส่งข้อความด้านล่างเพื่อติดต่อเราทาง Facebook