หัวแอมป์สำหรับกีตาร์เบสขนาดเล็ก Trace Elliot ELF 230eb 3-band EQ, Gain, and Volume controls, มีกำลังขับ 200 วัตต์ 4 โอหม์, XLR output ensures that your onstage tone reaches the PA, headphone output, เหมาะสำหรับใช้คู่กับตู้ลำโพงของ Trace Elliot 1×10 นิ้ว หรือ 2×8 นิ้ว มาพร้อม carry bag
ราคาไม่รวมภาษีมูลค่าเพิ่ม…
฿12,900.00
หัวแอมป์สำหรับกีตาร์เบสขนาดเล็ก Trace Elliot ELF 230eb 3-band EQ, Gain, and Volume controls, มีกำลังขับ 200 วัตต์ 4 โอหม์, XLR output ensures that your onstage tone reaches the PA, headphone output, เหมาะสำหรับใช้คู่กับตู้ลำโพงของ Trace Elliot 1×10 นิ้ว หรือ 2×8 นิ้ว มาพร้อม carry bag
The Trace Elliot® ELF is a bass amplifier. Weighing just 1.6 pounds, this revolutionary amp is small enough to fit in your back pocket. The ELF’s remarkable technology and size make it the most portable, gig-worthy bass amplifier ever made. It’s an ideal solution for any bassist who is concerned with size and weight, but isn’t willing to compromise on tone or performance.
The ELF produces a solid, fan-cooled 200 continuous watts RMS at 4 ohms. The switch mode power supply has thermal as well as over-current protection, and the gain knob features a bicolor LED that turns red when the preamp compressor engages.
The unique input gain has three regions of operation – uncompressed, variable multiband compression, and overdrive. In terms of sonic quality, the ELF has a clean signal path with simple controls, making it easy to achieve a professional bass tone.
The 3-band rotary EQ has three proprietary Trace Elliot filters: low center (80 Hz), mid center (500 Hz) and high center (4.2 KHz). Studio-quality XLR outputs, with a ground lift switch, ensure the tone the player has on stage is the same tone in the PA. There’s also a headphone output to enable quiet practice.
The ELF comes with an embroidered nylon carrying case, an owner’s manual CD-ROM that includes the REAPER™ DAW and Peavey® ReValver® amp modeling software, and a Union Jack sticker that reminds of Trace Elliot’s U.K. roots.
Mains Voltage: 100-120 vac – 50/60Hz – T3.15AL/250V , 230 vac – 50/60Hz – T1.6AL/250V | Power Consumption: Typical = 30W , Maximum = 240W |
SMPS: Thermal protection Over-current protection | Noise floor with sig (nom.) =-88dBu |
Protection: Clip limitin Thermal Over-current / Short-circuit DC output |
Minimum Load: 4 Ohm |
Power Output (1% THD): 130W – 8 Ohm 200W – 4 Ohm | Noise: -62.5 dBu |
Nominal Input Sensitivity: All controls @12:00 = -6.44dBu (369mV) | Input Impedance: >10 meg Ohm |
EQ: 3 – band rotary type with proprietary TE filters Low center = 80 Hz Mid center = 400 Hz High center = 4.2 KHz |
DI XLR Balanced Output: PIN 1 = GND, PIN 2 = sig+, PIN 3 = sig- Post EQ 1 KOhm output impedance with GND lift switch Noise floor = -104.3dBu |
Weight: 1.6 lb (0.73 Kg) | Dimensions (HxWxD): 1.35 x 6.75 x 4.10” (3.4 x 17.1 x 10.4 cm) |