ลำโพงสตูดิโอ GENELEC 1032B PM 10″ Studio Monitor

ลำโพงห้องบันทึกเสียง Genelec 1032B PM 2-Way Studio Monitor สีดำ ขนาดดอดลำโพง Woofer 10นิ้ว, ขนาดเสียงแหลม Tweeter 1นิ้ว, 180 วัตต์ Bass Amplifier 120 วัตต์ Treble Amplifier

ปัจจุบันเปลี่ยนรุ่นเป็น GENELEC 1032C SAM STUDIO MONITOR 10″

ราคาสินค้าเป็นราคาต่อใบ…และไม่รวมภาษีมูลค่าเพิ่ม

฿107,000.00

สอบถามและสั่งซื้อสินค้า

Category: ลำโพงห้องบันทึกเสียง (Studio Monitor) Tag: GENELEC

Description

Genelec 1032B PM 10″ 2-Way Bi-Amplified Active Monitor

The Genelec 1032B 10″ 2-Way Bi-Amplified Active Monitor (Single) Black Veneer is designed for high-power near-field monitoring such as in music studios, mobile vans, surround sound systems, multimedia installations, and TV broadcast facilities. The speaker consists of a 10″ bass woofer, a 1″ metal dome tweeter, a custom crossover network, and a removable rackmountable amplifier system on vibration isolators. The monitor utilizes a directivity control waveguide to balance the frequency spectrum, and a long-flow bass-reflex enclosure to improve low-end performance.

The monitor uses a parallel bandpass filter crossover network set to 1,800 Hz with acoustically complementary 24 dB/octave slopes. It includes an input sensitivity adjustment control from -6 dBu to +7 dBu which provides a maximum SPL range of 100 dB at 1 m on the lowest setting to 113 dB at 1 m on the highest setting. The monitor also includes three advanced tone controls with treble tilt, bass tilt, and bass roll-off for tuning the performance of the system to different acoustic environments.

The 10″ bass woofer is loaded into a 24-liter cabinet, is amplified by 180 W short-term power, and can play down to 36 Hz. You can supplement the bass by adding a Genelec 7071A subwoofer for even more low-frequency extension. The 1″ metal dome tweeter can play up to 23,000 Hz, is amplified by 120 W short-term power, and utilizes the directivity control waveguide to achieve phase and delay uniformity.

Both the woofer and tweeter are magnetically shielded and utilize a thermal overload protection circuit. The monitor accepts a balanced signal via XLR connector and provides you with the controls to optimize the system performance for your listening position.