ชุดอุปกรณ์บันทึกเสียง Focusrite iTrack Dock Studio

Focusrite iTrack Studio Pack สำหรับผู้ที่ต้องการอุปกรณ์บันทึกเสียงแบบครบชุดคุณภาพโปรในราคาประหยัดประกอบด้วย USB ออดิโออินเตอร์เฟส 1 เครื่อง , หูฟัง 1 ตัว, ไมโครโฟน 1ตัว

ราคาไม่รวมภาษีมูลค่าเพิ่ม

฿9,990.00

สอบถามและสั่งซื้อสินค้า

Category: อุปกรณ์บันทึกเสียง (Studio & Recording) Tag: Focusrite

Description

Focusrite iTrack Dock Studio Pack kit designed for iPad

The iTrack Dock Studio Pack from Focusrite is a kit designed to provide you with the tools to make professional iPad recordings. Included in the kit is an iPad audio interface with two microphone pre-amplifiers, a large diaphragm CM25 condenser microphone with stand clip, HP60 closed-back headphones, a 9.8′ XLR cable, and a USB cable.

To start recording on iPad with quality 24-bit audio and sample rates of up to 96kHz, dock your iPad, connect the microphone and headphones, plug your instruments in, and hit record. The halos around the gain knobs turn from green to red if you get too loud, while the high headroom instrument input helps you get a clean recording. The large diaphragm condenser microphone is ideal for recording vocals and comes with an XLR lead and stand clip, so you can set up straight away. The professional closed-back headphones are designed to block out any distracting outside noise while you record and mix performances.

focusrite_itrack_dock_studio_3

Features:

Precision converters transform your live performance into studio-quality 24-bit resolution digital audio, with sample rates of up to 96kHz and a dynamic range of over 105 dB
Features two high quality line level inputs so you can plug synthesizers, drum machines or any other line level device in as well
Rings of light around the input gain controls turn from green to red if you get too loud
Allows you to charge your iPad, power a USB device and integrate with almost any class compliant USB MIDI controller, all without any USB hubs or camera connection kits
Features a large control knob and dedicated headphone level controls to help you set suitable output level
Download Tape, the Focusrite iPad recording app

Specifications

Analog Input
Frequency Response	Mic: 20 Hz – 20 kHz +/- 0.2 dB (minimum gain) Line: 20 Hz – 20 kHz +/- 0.2 dB (minimum gain) Instrument: 20 Hz – 20 kHz +/- 0.2 dB (minimum gain)
THD + N	Mic: < -99 dB (minimum gain, -1dBFS input with 20 Hz / 20 kHz bandpass filter) Line: < -98 dB (minimum gain, -1dBFS at output with 20 Hz / 20 kHz bandpass filter) Instrument: < -90 dB (minimum gain, measured at max input level -1 dB, 20 Hz / 20 kHz bandpass filter)
Noise	Mic: Equivalent Input Noise (EIN) < -125 dBu CCIR-RMS (measured at maximum gain with 150 Ω termination) Line: Noise (NiPoS) <-104 dBFS CCIR-RMS (measured at minimum gain with 50 Ω termination) Instrument: < -104 dBu CCIR-RMS (measured at minimum gain)
Gain Range	Mic: -4 dB to +46 dB (dBFS / dBu) ±1 dB Line: -22 dB to +28 dB (dBFS / dBu) ±1 dB Instrument: -16 dB to +34 dB (dBFS / dBu) ±1 dB
Maximum Input Level	Mic: > +4 dBu (at 1% THD) Line: > +21 dBu (at 1% THD) Instrument: > +14 dBu (at 1% THD)

Analog Outputs
Nominal Output Level	0 dBFS = > +10 dBu, balanced 0 dBFS = > +4b Bu, unbalanced
Frequency Response	20 Hz – 20 kHz +/- 0.2 dB
THD + N	< -100 dB, balanced (0 dBFS input 20 Hz / 20 kHz bandpass filter)

General
Clock Sources	Internal clock only
Dynamic Range	105 dB ‘A-weighted’ (all outputs) Converter chipset D-A dynamic range 114 dB
Supported Bit/Sample Rates	44.1 kHz, 48 kHz, 96 kHz 24 Bit
LEDs	1 x Green, signal present (-24 dBFS) 1 x Red, signal overload (0 dBFS), peak held for approximately 1 sec
Dimensions (H x W x D)	2.5 x 11.0 x 6.6″ (6.4 x 28.0 x 16.8 cm)
Weight	1.5 lb (0.7 kg)